Brick Paver Sealer Remover and Stripping Instructions
Brick pavers can make beautiful exterior surfaces, from driveways and sidewalks to patios and landscape walls. Sealing brick pavers can enhance their natural beauty and provide lasting protection from Mother Nature.
There are many types of brick paver sealers. Water-based, oil-based, and acrylic sealers are just a few examples. They can come in many finishes, from matte to a glossy “wet look.” No brick paver sealer will last forever, so maintenance is a necessity.
When an old brick paver sealer simply wears off and fades away, the surface can be cleaned and refinished with a new one. But sometimes, brick paver sealers can fail prematurely. This happens for several reasons.
Overapplication is a common occurrence. This causes the brick paver sealer to turn white or yellow and become an eyesore. A cheap or inferior paver sealer may fail before you expect it to. Moisture is also an enemy of a brick paver sealer and can cause a sealer to fail.
When a brick paver sealer fails it is necessary to remove it before you can reapply and a new coat of paver sealer. RAD PaintStrip Brick Paver Sealer Remover is the only product on the market that will remove most acrylic “wet look” brick paver sealers.
This brick paver sealer remover is user-friendly and can be applied in a few easy steps.
1. Roll the brick paver sealer remover onto the failed sealer. Best to apply in sections of about 100 sq. feet at a time. This will allow the stripper to stay active and not dry out.
2. Let the sealer remover dwell on the failed paver sealer for 15-20 minutes.
3. Pressure wash the brick paver surface. Reapply to stubborn areas as needed.
Brick paver sealer remover coverage rates can vary depending on the sealer being removed. Check the coverage rates for the product you use. Always follow the manufacturer’s instructions and wear protective gear when handling.
After removing the existing failed brick paver sealer, rinse the surface thoroughly and let the brick pavers dry for 1-2 days before re-sealing.
Keeping your brick pavers sealed and maintained improves their appearance and longevity. It is a great way to protect your investment, and by following these guidelines and using a quality brick paver sealer remover, it can be an easy weekend project.
Any Questions On Removing a Failed Paver Sealer? Just Ask Below in Comments
Hi!.We had a company come out and do a TERRIBLE job (see photos). Now I need to strip the entire patio! Also, there is polymeric sand in between the joints that needs to come out. What is the best stripper for this?
https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
I used Masonry Defender Low Gloss Paver Sealer and applied it to pavers that were not real dry. Maybe over applied in certain areas because spryer tip was not working well. White residue has covered large portions of the paver area. How can I fix this problem
Strip it all off and start over. You cannot apply the sealer to damp pavers, it will blush.
https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
We do not have samples of the stripper to test.
i would like to remove Black Diamond Dominator water based gloss sealer . I have about 800 sq ft
Use this: https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
We stained our concrete pavers the perfect color using Direct Colors Acid Stain. Then we made the mistake of sealing them with the same company’s sealer. The sealer turned the pavers very dark and shiny. Can we use this remover to restore the unsealed look?
Depends on the sealer brand and type that was used?
Direct Colors’ Easyseal, solvent-based acrylic satin outdoor sealer
It will remove the sealer but it may also take off some of your stain.
What’s the best sealer remover for oil based?
What type of sealer and brand are you trying to remove? The “base” is not applicable.
It was on there when we purchased the house. We don’t have information of the type or brand. We had someone test it and they said it was an oil base. It’s very white between pavers around the pool. They want $3 per foot and we have appx. 3000 sq ft. Thinking we will do spot sealant remover where it needs it ourselves before having it resealed. Just don’t know what kind to use.
You cannot spot strip. It will all have to be stripped. You can post pictures of the issues here in the comments.
Will this takeoff experiences from pavers
???
I have an apt in a NYC building. sadly, big walls of red brick were sealed with a glossy finish. prior to that, the brick was an array of beautiful natural colors that had been assembled and faded over 100 years… do you have any products and advise for me to remove brick sealer to get rid of the now glossy and dark red finish?? I’m desperate to restore the brick back to its original glory… thank you!! Aaron
Post pictures.
I have Eagle Solvent -based sealer on a brick patio. I am trying to remove the sealer. Will your product do that?
Yes.
I bought 2 gallons of sure strip to remove diamond sealer off my brick pavers. I ve done it 4 times and still have lots of sealer showing. Do you have a stronger remover I can use. Thanks Denny
We do not. Make sure to pressure wash off after applying.
What is the best sealer removal?
https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
I sealed my covered patio 48 hours ago and it’s still pretty tacky. I think I used too much and may need to remove it. How long before the tackiness should wear off?
Depends on the sealer brand you applied. It may not cure and will need to be stripped over over applied.
We have pavers inside our house and can’t pressure wash. What is the best way to remove old sealer? and also to remove stains? or is it better to just grind off the top layer of the paver?
Sorry but we do not sell any products that can be used indoors for this. You cannot grind this out.
What’s the best stripper to remove a water based sealer off of pavers need this ASAP. Please help.
What brand and type of sealer was it?
It was dominator high gloss wet look sealer
Use this: https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
I only need one gallon of it and I need this for pavers not concrete
You can use this: https://www.brickpaversealer.com/surestrip-1-gallon
Surface type does not matter.
https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
Which product will remove an oil based paver sealer?
This product removes solvent and water based acrylic sealers:
Hi I want to remove this white film of my Pavers what do you recommend.
Use this to strip: https://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
Is this stripper good for removal of water based or oil based sealer removal.
It removes both water and solvent-based acrylic sealers.
Sorry I used the product Higro paver sealer
I have terr cotta tile in my home used nitro paver sealer on them . Now it’s pealing need to strip sealer what do you recommend
Sorry, but we do not have a stripper that can be used indoors.
Will this product remove Defy Paver Sealer applied on clay bricks about 10 years ago?
Yes.
Brick pavers on porch have an old Thompson’s Brick Sealer on them. Trying to remove it and reseal. Have tried recommendations from many Home Improvement Stores here locally. Some suggestions have been paint remover, mineral spirits, etc. They have helped a little, but no overall major improvements. Whitish film on the surface now of many of the bricks. Would this product take care of the job at hand? Tired of trying suggestions from these retailers that do not work!
But I know this is not an impossible task. There HAS to be some type of solution to the problem!
Thanks, in advance, for advice, suggestions, and feedback!
Sorry but this will not strip Thompsons water sealer.
should you seal the patio before adding more sand to the pavers
Sand first.
We need to strip our pavers but do not know whether the old sealer is acrylic or water based. Will the stripper mentioned here remove both acrylic and water?
It removes both water-based and solvent-based acrylic sealers. Acrylic is in both.
I applied valspar gloss sealer to my pavers and the next day there were cloudy or milky looking areas on the pavers. I have spent a lot of money trying to get these removed and not successful. What can I do to get these areas of the valspar sealer I used off. Looks terrible and not what I expected at all. I have spent lots of time trying to get this ugly site removed.
Post a picture.
Is zylene the same as stripper products to remove sealant such as diamond clear on brick pavers
Xylene is not a stripper and is not an ingredient in our stripper.
Will your product remove Diamond Clear sealer?
Yes.
where do I buy one or two gallons? I live in Salem, Ore. Use sb 8700
Last looked fine till I washed of the patio, now it is come off
Did to strip it off! stanly.page@comcast.net
It is only sold in 5-gallon pails and only online.
Can I use a paver stripper for pavers around my pool? Will damage the pool if it gets into pool water?
You cannot wash the stripper or the sealer residue you are removing into the pool.
I only need a quart. Do you sell by the quart?
No, we do not.
Can I use this product to remove Thompson’s wetlook sealer?
It should work on this.
Do you ship to uk ?
And how much is it ?
No, we do not.
Only online: http://www.brickpaversealer.com/concrete-and-paver-sealer-stripper-5-gallon
Takes about 3-4 business days.
Is there someplace in South Florida I can buy this or how long does it take to get to Florida
Yes that is okay.
Was wondering that when u strip at 100 sq ft at a time and pressure wash product off. Can u start the next area if it’s wet from the over spray of pressure washer?
On this link in the above menu:
http://www.brickpaversealer.com/paver-sealer-stripper
where can I buy th e Super Seal Brick Paver Sealer Remover?
More then likley yes. Might want to clean and do one test spot with the new sealer to make sure it dries correctly after 24 hours. Look at the Super Seal 25 Paver Sealer.
I would not say it has discolored and it has not turned white. The main reason I am asking is because the pavers just look dull and not anywhere near what they looked like three years ago. Water seems to immediately soak in as soon as I apply it to most areas. Does this mean I can just clean the deck without needing to strip it?
Has the SB-1300 discolored or failed by peeling, turning white, etc? If you spill water on the pavers, does it bead or soak in shortly?
3 years ago when I had my patio installed using Belgard pavers. At the advice of a friend I sealed the pavers using Surebond 1300 Joint Stabilizing sealer (water based). My deck is now looking dull and has lost all of its original color vibrance. Do I need to use a sealer remover prior to using a new sealer? I would like to try a “wet look” sealer this time to bring back some of the pavers original look.
Depends on what type of sealer it is. This sealer will remove both water and solvent based sealers that are acrylic.
Does this product work on water based sealants that are around a month old